Exerpeutic 1111 El manual del propietario

Programmable Recumbent Bike IMPORTANT: Read all instructions carefully before using this product. Retain thi

1. Front Stabilizer Installation Lift up the Front Main Frame (73) towards the front, and then align the Front Stabilizer (78) on

2. Rear Stabilizer Installation Lift up the Rear Main Frame (26) towards the end, and then align the Rear Stabilizer (38) onto the

3. Rear Main Frame Installation Use 6mm Allen Wrench to remove six Bolts (39) and six Washers (40) from the Rear Main Frame (2

4. Seat and Right/Left Handrail Support Tubes Installation Use the Multi Hex Tool with Phillips Screwdriver to remove four Bolts

5. Back/Seat Support Bracket and Seat Sliding Tube Installation Use 6mm Allen Wrench to remove eight Bolts (39) and eight

6. Front Post and Front Post Cover and Foot Pedals Installation Use 6mm Allen Wrench to remove four Washers (40), four Bolt

7. Left and Right Foot Pedals Installation The Cranks, Pedal Shafts, and Foot Pedals are marked “R” for Right and “L” for Left. I

18181919691212111110101313613132929171754324Allen Wrench 5mm Multi Hex Tool with Phillips ScrewdriverS10, S13, S14, S15 Tool: 8.

9. Armrests Installation Align and hold the Armrest (20) onto the Right Handrail (12), use 5mm Allen Wrench to tighten two Bolt

10. Computer and Bottle Holder Installation Use the Multi Hex Tool with Phillips Screwdriver to remove four Bolts (45) from the

SERVICE ------------------------------------------------------------------------ 2 LABEL PLACEMENT ------------------------------------------------

11. Adapter Installation Plug one end of the Adapter (76) into the power jack of the Power Supply Cable (74) on the Left Cover (7

Button Functions: START/STOP: Press the START/STOP button to start or stop training. Press and hold the START/STOP button for 3 seconds, a

Display Functions: SCAN: The computer will automatically scan each function in sequence with change every 6 seconds. SPEED: Displays the current

Operating Ranges Program Operation: Manual Program: Press the UP or DOWN button to select Manual Program, the “MANUAL” icon will flash, th

TIME or DISTANCE for target pre-setting and Calories begins to flash for pre-setting target calories. Press the UP or DOWN button to adjust th

exercise with different resistance level in different intervals as the user program profile shows. User may also exercise in any desire resist

Adjusting the Rear Stabilizer End Cap or Adjustable Leveler Turn the rear stabilizer end cap on the rear stabilizer or adjustable leve

TROUBLE SHOOTING PROBLEM: The recumbent bike wobbles when in use. SOLUTION: Turn the rear stabilizer end cap on the rear stabilizer or adjustable

WARM UP 27 Quadriceps Stretch With one hand against a wall for balance, reach behind you and pull your

Paradigm Health & Wellness, Inc. warrants to the original purchaser that this product is free from defects in material and workmanship when us

IMPORTANT: FOR NORTH AMERICA ONLY To request product service and order replacement parts, please call our customer service department at: 1-866

Paradigm Health & Wellness, Inc. PARTS REQUEST FAX FORM Please fax this form to (1-626-810-2166) OR YOU CAN EMAIL CUSTOMER SERVICE REQUESTS TO

3 LABEL PLACEMENT

Basic precautions should always be followed, including the following safety instructions when using this equipment. Read all instructions before us

OVERVIEW DRAWING 5 15152525282818611212954327202023231010222224241616872424202010102222141461313101011111818191930303

No. Description Qty No. Description Qty001 Handrail End Cap Ø32x1.5 2 025 Bushing 2 002 Bolt M6x15 4 026 Rea

No. Description Qty No. Description Qty049 Bolt M8x10 4 074 Power Supply Cable L=300 mm 1 050 Extension Sensor Wi

8 HARDWARE LIST & TOOLS Allen Wrench 5mm 1 PC Allen Wrench 6mm 1 PC Multi Hex Tool with Phillips ScrewdriverS